The percentage on a tint chart is how much visible light gets through the window, so a lower number means a darker window. 5% is limo dark, 35% is medium and 70% is almost clear. In Florida, the numbers that matter most are 28% for front side windows and 15% for rear windows on a car (6% on an SUV or van). Below you'll find the full chart, how to read it on real glass, and how to choose a shade that looks right and stays legal.
TL;DR
- The percentage is VLT, visible light transmission: 20% tint is darker than 35%, and 50% is darker than 70%.
- Florida requires at least 28% light transmission on front side windows, and at least 15% behind the driver on sedans or 6% on multipurpose vehicles like SUVs and vans.
- Factory glass is already slightly tinted, so a film rated 35% will read darker than 35% once it's on the window.
- Heat and UV protection come from the film technology, not the shade. A light ceramic film can still block most UV and a large share of infrared heat.
- We install ceramic film at your home, work or driveway across Volusia and Flagler counties, and we can help you pick a legal shade for your exact vehicle.
Table of Contents
- What the percentage on a tint chart actually means
- The tint percentage chart, 5% to 70%
- Florida tint laws: the limits by window
- Why the film number is not the number on your window
- Tint percentage is not heat or UV protection
- How to choose the right percentage
- Perspective
- Get it measured and installed where you park
- FAQ
- Sources
What the percentage on a tint chart actually means
Every number you see on a shop wall, a film box or a state law refers to the same measure: visible light transmission, or VLT. It is the share of visible light that passes through the glass and film together. A 35% VLT means only 35 percent of visible light gets into the car, and the rest is blocked or absorbed.
That is why the scale feels backwards at first. Tint is named for what it lets in, not what it blocks. A 5% film lets in one twentieth of the light. A 70% film lets in seven tenths.
Some people read the number the other way around, as the share blocked. If someone quotes you "65% tint," ask whether they mean 65% blocked, which is the same as 35% VLT. When in doubt, say "VLT" out loud and everyone is talking about the same thing.
The tint percentage chart, 5% to 70%
Here is how the common shades compare on a typical vehicle. The "Florida use" column reflects the state rules covered in the next section.
| Film VLT | How it looks | Privacy | Florida use |
|---|---|---|---|
| 5% | Very dark, hard to see in even up close (limo tint) | Highest | Only on rear windows of SUVs and vans, and only if the finished window is at 6% or lighter |
| 15% | Dark, faces hard to make out in daylight | Very high | Rear windows on cars, if the finished window is 15% or lighter |
| 20% | Dark, a common rear window choice | High | Rear windows on cars and SUVs |
| 25% | Medium-dark, clear privacy, some visibility in | Good | Rear windows only |
| 30% | Medium, visible tint look | Moderate | Front sides at 28% or lighter after glass is counted |
| 35% | Medium, a classic front side look | Moderate | Front sides, if the finished window is 28% or lighter |
| 50% | Light, trims glare with a subtle look | Light | Front sides, always fine |
| 70% | Very light, close to clear glass | Minimal | Front sides and windshield-strip alternatives |
The shade descriptions follow the common industry ranges, for example 5% described as very dark and 70% as close to factory glass. Treat the look as a guide. Paint color, interior color and the time of day change how any shade appears.
Is 20% or 35% tint darker?
20% is darker. It lets in 20% of the light, while 35% lets in 35%. In practice, Madico's film simulator data shows glare reduction of roughly 57 to 62% at 35% VLT and roughly 75 to 79% at 20%, which is a visible step in how dark the cabin feels.
Is 50% tint darker than 70%?
Yes. 50% lets half the light through and 70% lets seventy percent through. The same simulator data puts glare reduction at roughly 16% at 70% VLT and 37 to 41% at 50 to 55%. A 70% film looks nearly invisible from outside, which is why people choose it when they want heat and UV control with no change in appearance.
Florida tint laws: the limits by window
Florida sets its rules in Chapter 316 of the state statutes, and they separate sedans from multipurpose passenger vehicles such as SUVs and vans. Here is what the current law says, window by window.
| Window | Sedans and cars | SUVs, vans and multipurpose vehicles |
|---|---|---|
| Front side windows | 28% VLT or lighter, reflectance 25% or less | 28% VLT or lighter, reflectance 25% or less |
| Rear side windows | 15% VLT or lighter, reflectance 35% or less | 6% VLT or lighter, reflectance 35% or less |
| Rear window | 15% VLT or lighter, reflectance 35% or less | 6% VLT or lighter, reflectance 35% or less |
| Windshield | Transparent strip at the top only | Transparent strip at the top only |
The front side window rule is in Florida Statute 316.2953, and the rules for windows behind the driver are in section 316.2954. That section allows film on rear glass with reflectance of no more than 35% and light transmittance of at least 15%, or at least 6% on multipurpose passenger vehicles.
Two details trip people up:
- The limit applies to the finished window. Law enforcement measures the glass and film together, not the number printed on the film box. More on that below.
- Reflectance counts too. Mirror-style films fail even when the VLT looks fine. Front sides can reflect no more than 25% and rear windows no more than 35%.
The windshield is different. Film is allowed only as a transparent strip along the top that stays out of the driver's direct forward view, so a full windshield tint is not a legal choice for a regular passenger vehicle on public roads.
What happens if your tint is too dark
A violation is a noncriminal traffic infraction, punishable as a nonmoving violation under the state's statute. That means a citation and the cost of removing and replacing the film, not a criminal charge. The same law covers installers and sellers, which is one more reason to hire a shop that checks the numbers before it cuts film.
Laws can change, so check the current statute or our Florida tint law page before you order a darker shade. If you have a medical condition that needs extra light protection, ask your doctor and the Florida Department of Highway Safety and Motor Vehicles about the exemption process before you choose a shade.
Why the film number is not the number on your window
This is the part most charts skip. Car glass is never perfectly clear. Factory glass typically transmits somewhere around 70 to 80% of the light, and VLT multiplies through each layer. The formula is simple:
Finished VLT = glass VLT × film VLT
AutoZone's guidance makes the same point: if your windows have factory tint, you need to account for both to avoid ending up too dark.
Here is how that plays out:
| Glass VLT | Film VLT | Finished VLT | Legal on Florida front sides (28%)? |
|---|---|---|---|
| 80% | 35% | 28% | Right at the limit |
| 75% | 35% | about 26% | No |
| 70% | 35% | about 24.5% | No |
| 75% | 50% | about 37.5% | Yes |
| 70% | 50% | 35% | Yes |
The calculation is plain multiplication. A 35% film on 70% glass gives 0.35 × 0.70 = 0.245, so about 24.5%.
So the shade many people think of as the classic legal front tint can land under Florida's 28% line. The safe move is to measure your glass before you pick a film. A 50% film on most clear front glass gives a comfortable margin and still cuts glare.
Rear glass with privacy glass
Many SUVs, trucks and crossovers come from the factory with dark rear privacy glass, often around 15 to 25% VLT. Film over that glass makes it darker again. A 35% film on a rear window already at 20% finishes near 7%, which is under the 15% limit for a car and just above the 6% allowed on a multipurpose vehicle. If your SUV has privacy glass, a lighter film on the rear, or leaving it alone, can be the legal and sensible call. Ask your installer to measure each window before you commit.
Tint percentage is not heat or UV protection
People assume darker means cooler. Not exactly. The shade controls visible light, glare and privacy. Heat rejection depends on the film technology. Madico notes that heat performance depends on the film, not just its shade, and its example of a light film at about 75% visible light transmission still rejects 90% of infrared heat and 99% of UV.
That is why ceramic film is popular in Florida. Ceramic particles target infrared heat without needing a dark look, so you can stay inside the legal limits and still feel the difference on a July afternoon in Daytona Beach.
UV works the same way. It is blocked by a dedicated layer in the film, separate from the layer that sets VLT. Check the UV rejection rating on the spec sheet instead of guessing from the shade.

Glare is where darkness does help
Glare reduction does rise as VLT falls. From the same Madico simulator data: about 16% at 70%, 37 to 41% at 50 to 55%, 57 to 62% at 35%, 75 to 79% at 20% and 94 to 95% at 5%. If you drive east on I-95 at sunrise or along A1A in the afternoon, glare is often what you actually want to fix.

How to choose the right percentage
Start with what you want the window to do, then check what the law lets you do.
- Decide your main goal. Comfort and heat, privacy, looks, or glare.
- Check your vehicle type. Sedan or multipurpose vehicle changes your rear limits.
- Measure the factory glass. This tells you the starting VLT.
- Do the multiplication. Make sure the finished number clears 28% in front and 15% (or 6%) in back.
- Pick the film technology. Ceramic gives you heat and UV performance at any shade.
- Match all windows. Keep fronts and backs looking consistent within what the law allows.
A few common setups that fit Florida's rules on most vehicles:
- Clean, subtle look with strong heat control: a light ceramic (about 50 to 70%) on the front sides, and something darker on the back where the law permits.
- Privacy for kids, pets and gear: a darker rear film on an SUV, chosen after measuring the privacy glass.
- Daily commuter focused on comfort: a full set of ceramic at a shade that clears 28% in front.
The same logic applies to buildings, though home and business windows are not covered by the vehicle statute. Residential and commercial films are chosen for solar control, glare and privacy, not a legal VLT limit. If you're also tinting your house or storefront, our residential window tint and commercial window tint pages explain the options, and our storefront tinting guide covers glare and display protection.
Perspective
Most of the tint questions we get come down to one surprise: the number on the film is not the number on the glass. We've seen drivers choose a shade off a chart, then learn it falls under the legal line once the factory glass is counted in.
That is why we start every job by looking at the glass, not just the film sample. We install ceramic-only film because we want heat and UV performance to come from the technology, so you aren't forced into a very dark shade to feel a difference.
We also don't rush the work. Careful prep and fitment is how a window ends up clean at the edges and consistent across the vehicle, and it is why our service includes warranty support with no-fault coverage. Because we come to you, you can talk through the shade in your own driveway, with your own vehicle in front of us.
Tint
Get it measured and installed where you park
Tint Monkeys is a mobile shop serving Daytona Beach, Deltona, New Smyrna Beach, DeLand, Port Orange, Ormond Beach, Palm Coast, Edgewater and the rest of Volusia and Flagler counties. Our fully equipped mobile units bring ceramic film to your home, workplace or dealership lot, so you don't lose a day at a shop.

For vehicles, we offer Pro Ceramic and Select Ceramic films, with packages for sides and rear, front two, windshield and visor strip. See the options on our automotive tint page, or book mobile window tinting and tell us your vehicle so we can recommend a shade that clears Florida's limits. Prices are quoted per vehicle, so ask us for your quote.
FAQ
What is the darkest legal tint in Florida?
On front side windows the finished window must let in at least 28% of light. On the rear windows of a sedan the limit is 15%, and on an SUV or van it is 6%. These are limits on glass and film together, so the film you buy has to be lighter than the finished number.
Is 35% tint legal in Florida?
It depends on your glass. A 35% film on clear factory glass of around 70 to 75% finishes near 24 to 26%, which is under the 28% front limit. A 35% film is fine on the rear windows of most vehicles. Measuring before you install settles it.
Is 70% tint legal in all states?
No. Some states, such as California, New York and Pennsylvania, require 70% light transmission on tinted windows, while Florida's front side limit is 28%. Always check the state where the vehicle is registered and driven.
What percentage tint is best?
There is no single best shade. For a subtle look with strong heat control, many drivers pick a light ceramic. For privacy, a darker rear film works where the law allows. The right choice depends on your glass, your vehicle type and what you want the window to do.
Does a lighter tint block less UV?
Not necessarily. UV blocking comes from a dedicated layer in the film, separate from the shade. Check the UV rating on the film's spec sheet, and note that even very light films can block most UV.
Sources
- Florida Statute 316.2953, side windows
- Florida Statute 316.2954, windows behind the driver
- Florida Statute 316.2956, penalties
- Madico car window tint simulator
- AutoZone, what is tinted window percentage
- Window tint percentages chart, 5% to 70%
- Kelley Blue Book, car window tinting
